BMW RANGE ROVER | V8 STROKER CRANK

V8 STROKER CRANK KITS

We can supply a stroker kit for your BMW or Range Rover engine build !

The stroker crank is regarded as one of the best ways to increase dramatic torque and increased horsepower together with reliability compared to any standard form of such equipment. Increasing the stroke increases the displacement of an engine and is a sure way of obtaining that noticeable raw acceleration that pulls you back in your seat without having to rev the engine to equal the power gains. By lengthening the crankshafts stroke, increasing the cylinder bore diameter and raising the compression ratio, power gains of between 30 to 40 percent are realistically within the ball park and most of it is in the form of torque, which provides noticeably greater acceleration.

Stroker kits are made to order and can be made to almost any size or length, Piston choice is endless as they are manufactured to suit each and every application whereby the forged piston manufacturing process tops the list followed by billet pistons and mass produced cast pistons which are the inferior of the three products, designed to last only as long as your warranty permits. Compression height largely determines compression ratio which is key when building any particular engine whether naturally aspirated, , supercharged, turbocharged or plumbed with nitrous oxide (NOS).

The decision is up to how much you are willing to spend on trick bits which are well worth purchasing because of the good resale value. Kits can be made up for any engine.

A STROKER KIT CONSISTS OF:

     1. All cranks are manufactured to standard size journals with the hard nickel-chrome alloy and the stroke made to your specification. Cranks are all peenshot to stress relieve and harmonically balanced.

    2. Oversize pistons: Forged pistons are made with the gudgeon pin hole located higher up in the piston to accommodate the longer stroke allowing you to use stock conrods.

    3. Payment : Stroker kits must be paid for in advance as these are special order items as it takes between 8-12 weeks to make the pistons and process the crankshaft for a stroker kit.

STROKER KITS CAN BE PREPARED FOR ANY PETROL OR DIESEL ENGINE.

CLICK HERE for more information on engine blueprinting stroker kits when ordering a reconditioned BMW or Range Rover engine from 'V8 ENGINE' your V8 Specialists.